- Do Now:What is the difference between writing feet vs inches in sketchup? form
-
Bench
- Video
- Draw a rectangle that is 6′,2′.
- Pull up 4′.
- With the tape measure tool draw a line 2′ from the top edge.
- Then use the line tool to draw a solid line over the dotted line.
- Use the line tool to draw a dotted line 2 inches from the new line.
- Use the push pull tool to push back the top of the shape 22 inches.
- Video
- Use the tape measure tool to draw dotted line 2 inches away from each edge on both sides of the bench.
- Use the line tool to replace the dotted lines with solid lines.
- Use the push pull tool to push away completely the inner rectangle below the bench.
- Video
- Draw dotted lines using the tape measure tool 2 inches away from the left and then 2 inches from the right edge.
- Replace the dotted lines with solid lines using the line tool.
- Use the Push pull tool to push in and away the rectangle between the legs.
- Delete unnecessary pieces as shown.
- On the back of the bench draw the legs using the pencil tool and delete unnecessary pieces as shown.
- Video
- Use the line tool to draw lines from mid point to mid point to create the appearance of separate boards as in a park bench.
- Select the entire bench and format with wood using the bucket tool.
- Save the bench as a 3d model. Then export as a 2d image.
- Post the image to your website.
- Post images of other objects you have created in both sketchup and sculptris.
-
Table
- step 1
- Draw a circle on the floor with a radius of 2′.
- Raise 2.
- Draw a line from the midpoint across the table to the opposite side. Draw a second line to form a +.
- Draw a circle close on each line close to the edge 1 inch in radius.
- step 2
- Select the line within each circle and then delete it.
- Then pull up each circle 36 inches.
- Select the entire table, right click and select group.
- Turn the table completely around
- step 3
- Draw a square 20 by 20 inches.
- Pull it up 1 inch.
- Draw squares from each corner 1,1 inch.
- Select each square and pull it up 20 inches
- Select the chair and group it. Turn it around.
- Double click on the chair and draw a line from the 1 inch away from the edge.
- Pull up the new shape 20 inches
- step 4
- Select the chair and use the move tool with options to copy the chair. You should have 4 chairs.
- Place the chairs around the table.
- Select the table and all the chairs. Make it all one group.
- Format it with the bucket tool
- step 5
- Add your name using the 3d text tool
- Save as a 3d object.
- Zoom in and export as a 2d image.
- Publish to your site